DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V

Ver imagen más grande y otras vistas (con zoom)

DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V

Codigo del articulo:CS-PS-DY20-220V

Precio Unitario : $ 179 - 211/set (Aviso de Descuento)
Precio de Mayoreo :
- Cantidad (sets) Descuento Amount/set
- ¿Necesitas más cantidades, por favor haga clic en Pedido al mayoreo

Por Favor Eliga el Tipo
110V 220V

Cantidad: set(s) Costo Total :
USD $211
Peso de Envio: 12.1lb (5.5kg) Flete
item añadido al carro

0 total en su carro, Total del carrito: $

Related Products

10%
OFF
- RECI W6 / S6 130W-160W CO2 Sealed Laser Tube
- $1,379 / pc
- Buy Now >>
- RECI W8 / S8 150W-180W CO2 Sealed Laser Tube
- $1,958 / pc
- Buy Now >>
- 135W Electromagnetic Air Pump for Laser Cutter Laser Engraver, 220V
- $64.39 / pc
- Buy Now >>
- RuiDa CO2 Laser Cutting Engraving Controller RDC6442S
- $318 / set
- Buy Now >>

Wooden Box: There is total one carton box.

Power Source Size	12" x 8" x 3.1" (312mm x 205mm x 80mm)
Power Source Weight	6.9lb (3.14kg)
Package	Carton box
Packing Size	16" x 11" x 6.5" (410mm x 280mm x 165mm)
Gross Weight	12.1lb (5.5kg)

Packing List:

Laser power source 1 set

Package:

Quality Assurance

1. The warranty period for the first buyer is 12 months.

2. The quality assurance is invalidated to the special offered products or customized products.

3. Power supply must working under regulated current, otherwise the power supply will not be guaranteed by manufacturer.

4. The returned Z - Series products must meet the following qualifications:

1) The appearance, structure and certificate are in good condition.

2) The power supply doesn't be impacted or pressed by external force.

Comprehensive guarantee for one year except the wearing parts

24 - hour technical support by email or calling

User - friendly English manual for machine using and maintaining

Spare Parts Supports

We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF format on how to replace the parts to you.

If you want to buy any parts from us, please tell us the names or pictures of the parts.

Satisfaction Guarantee

For the items other than consumable products sold via www.Sign-in-China.com, we provide 12 months warranty after shipment. All the extra parts for equipment can be purchased from www.Sign-in-China.com. Further, for our VIP customers, the period of warranty shall be extended to 18 months.

We offer 14 days 100% satisfaction guarantee on all our machines. If you are not satisfied after receiving an item, Sign-in-China.com promises that, within 14 days after actual delivery of such an item, you are allowed to return the item to us and get complete refund, provided the returned item does not affect its subsequent re - selling and you also undertake the charge of returning delivery.

More information, please look at the document of Training & Warranty & Service Policies.

Training & Warranty & Service Policies

CS-LP-DY20 laser tube power supply

Instruction for DY20

El vendedor asume toda la responsabilidad de este listado

Envío y manipulación

Cantidad: Pais:

1.Si opta por enviar por expreso, se puede ver que el honorario del envío es un poco alto, pero puede entregar a su puerta dentro de 3-5 días, sólo tiene que hacer el pago y esperar.
2.Si opta por enviar por mar, la tarifa de envío es más bajo, y hay que ir a los puertos para que el liquidación en la Aduana, y tomar la mercancía desde el puerto hasta su casa por sí mismo. Generalmente se toma from10 a 30 días, dependiendo de la dirección del destinatario.

Tiempo de Manejo

Enviará generalmente dentro de 3 días hábiles después de recibir el pago aprobado.

Enviar de Donde?

Tenemos 4 almacenes en el extranjero en todo el mundo que ahora incluye: Rusia, EE.UU., Brasil y México. y Estamos creando otro en Europa. Normalmente, enviaremos su pedido desde el almacén más cercano a usted. si las existencias cerca de usted están agotadas, le enviaremos su pedido a usted directamente de China.

política de devolución

Las compras pueden devolverse en las siguientes condiciones :: 1)Hay problemas de calidad después de abrir el paquete.; 2) Los productos son diferentes que en la lista de pedidos.; 3)Los productos se dañaron irreparablemente durante el transporte.

Detalles del pago

Forma de pago

1.PayPal (pagos en línea)
2.Tarjeta de crédito
3.Transferencia bancaria(T / T)
4.Western Union pago en línea / fuera de línea

Historial De Transacciones

Transacciones:

Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube.
Original: Asia and Pacific Area China
Quality standard: International
H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts.

Warm tips:
The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order.

Features:

This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube.
The power sourcesupply makes laser tube output larger and more stable.

Quick Response: It can enlarge laser power and prolong laser tube‘s service life.

Easy Control: The start and stop of laser can be easily controlled by TTL level.

This power supply / power source has output open circuit protection.

This power supply / power source has TTL signal indication, water through signal indication and laser output indication.

This power supply / power source has the BUTTON to test it work properly.

Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc

We stick the protection film on the power source to prevent the metal parts of the scrape!

I. Instruction for sub - connection wire of the control end

1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.

2) TH. TL refers to high and low power level respectively, and WP refers to water protection.

3) Footer 5 G refers to ground and 6 refers to input end.

4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5.

5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K.

6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.

7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection.

8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser.

9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions.

10) The ammeter is concatenated to the cathode line.

II. Instruction for power wire

Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.

III. Instruction for laser connection wire

1) The positive red - line with high voltage is connected to the laser tail

2) The negative white - line is connected to laser output window

IV. Current limitation

To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery.

V. Linear scale between input signal and the output current

Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA.

Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.

VI. Using current

The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation.

Quality Report:

Brand

reci

Preguntas y Respuestas

Pregunta	good morning is this power supply good enough for a 150 W CO2 tube? thank you Tanguy
Respuesta	Yes,this power supply is good for 130-160W laser tube. Thanks. Cheng Mobile/WhatsApp/WeChat: 0086 15671351765 Responder mediante sign in china

Item		CS-PS-DY20-220
Input	Input Voltage	AC220V (The order should be especially instructions )
	AC Frequency	47 - 440Hz
	Max Input Power	1000W
	Max Input current	10A
Output	Max output Voltage	50KV
	Max Output current	35mA
Efficiency		equal or more than 90% ( load down )
Time no-failure		equal or more than10000h
Response speed		equal or less than 1mS (the time from output of switch signal to 90% of initial setting current )
Voltage - resisting		Input - Output ,input - machine hull: C1500V 10mA 60s; output cathode and machine hull connection
Usage environment		Work temperature (-10 ~ 40) , Relative humidity: Equal or less than 90%
Cooling Type		The compulsive air cooling

Todo
Guia
Descripcion del articulo
Envio
Pago
Otro

Pregunta: good morning is this power supply good enough for a 150 W CO2 tube? thank you Tanguy; By tanguybeyens from Brunei Mar 10,2021

Respuesta: Yes,this power supply is good for 130-160W laser tube. Thanks. Cheng Mobile/WhatsApp/WeChat: 0086 15671351765; Por Sign-in-china Mar 10,2021

Pregunta: Where is this Item shipped from? What is the postal code of the place from which the Currier will collect this item?; By cohnjona from Paraguay Oct 19,2015

Respuesta: Hello friend,thanks for your questions,this item will be shipped from our company,beijing,postal code is 100070.You can check shipping cost from our website directly http://www.sign-in-china.com/cart/?act=freight&shippingweight=0.15&type=1&volume=0.0000242 or submiting the order directly,system will show different shipping ways and shipping cost.; Por Sign-in-china Oct 20,2015

Ver todo 2 Preguntas> >

Haz una pregunta

Elija un tema:

Descripcion del articulo Envio Pago Otro

Contenido:

Que quieres saber sobre este articulo?

Adjuntar archivos:

Preview	Size	State	Operation

Codigo de verificacion: Intenta con un nuevo codigo

Envio :: Enviamos a más de 200 países y 300 puertos de todo el mundo!

Por expreso: 3-5 días hábiles

Por mar: 20-60 días hábiles

¿Cuánto para que enviar a
mi casa?

Pago:

T/TTransferencia Bancaria :

:

:

Guía de vídeo :

Categorias Relacionadas
Electronic Components Fiber Laser Machine Spare Parts Lenses Laser Power Supply CO2 Laser Tubes Laser Controller Laser Mechanical Parts