Codigo del articulo:CW-5200TITY
Precio Unitario : $ 473 - 525/set (Aviso de Descuento) (Tiempo entrega 69-89 días)
Peso de Envio: 63.8lb (29.02kg) Flete
Wooden Box: There is total one carton box.
Machine Dimension |
58 x 29 x 47cm(22.8" x 11.4" x 18.5") |
Machine Weight |
25Kgs(50.7lb) |
Package |
Carton box |
Packing Size |
65 x 36 x 62cm(25.6" x 14.2" x 24.4") |
Gross Weight |
28Kgs(57.3lb) |
P.S.: cooling water additive is forbidden by express company, so we could not put it into the package. You can buy it from local.
Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!
Package:
Note: The Water Chiller is ordering production, need 3 to 5 days of stock up time.
Two-year Comprehensive Warranty for the Equipment & Machine of Sign-in-China.com
Sign-in-China.com guarantees that all the products are qualified in quality and the technical specifications have reached the factory inspection of OQC (Outgoing Quality Control).
(1) The entire body of all equipment or machines (except consumables) we sell is provided with a 2 - year warranty.
(2) Maintenance methods in which two options (either - or) available for the buyer:
· Normal: The buyer sends back a problematic part and Sign-in-China.com will identify whether repair or change a new one.
· Urgent: The buyer purchases a replacement and meanwhile sends back the problematic part, and then Sign-in-China.com will identify and decide whether refund the replacement.
(3) The Start Time of Warranty: Once such an equipment is shipped out.
(4) For maintenance service, please provide the invoice of purchase order (on which it indicates the equipment or machine model number, name and sold date), equipment or machine serial number, trouble or breakdown description, and better attach photo (s) or video (s).
(5) The purchase order PI is the essential proof for maintenance which ensures your legal interest and right. Please keep it properly after purchase.
Additional announcement, the following situations are not covered by the 2-year warranty:
(1) Any product or commodity which was not sold out by Sign-in-China.com (The model number and serial number are not issued by Sign-in-China.com)
(2) Any unauthorized repairing, mistake in use, damage, negligence, misuse, accident, change or modification, quality problem caused by incorrect installation;
(3) Tearing up or modifying of the label or the serial number of such an equipment or machine;
(4) Normal consumption or wearing off such nature usage, wearing down or aging of the cover or shell, plugging or socketing part or unit, etc;
(5) The using environment (temperature & humidity) did not match up the requirement specified in the manual or instruction document;
(6) The trouble or breakdown caused by incorrect operation or failure in following the operation instructed in the manual or instruction document;
(7) The parts or software not purchased from Sign-in-China.com;
(8) The wearing or vulnerable part;
(9) The breakdown or damage caused by nature disaster or force majeure (Such as earthquake, fire, flood, typhoon, thundering, etc).
For Receiving Equipment or Machine:
Normally, we will provide you the pictures of equipment or machine and its packing before shipping in order to proof such item in good condition without damages. When you receive it, suppose you find damage on external packing, instead of signing acceptance, please open it first and check the item inside the packing if there is any damage. If you find damage, you can definitely refuse signing acceptance and then claim loss from the express service company. At the same time, please take photos of the damaged packing and item, and contact us (Either our sales consultant whom you know or send email to “service@sign-in-china.com”). Hence, our people will assist you in handling such dispute
Troubleshooting of water flow alarm of CW-5200 water chiller
The installation of S&A CW-5200 water chiller
How to install CW-5200 water chiller onto the laser cutting machine
Troubleshooting:water chiller CW-5200 is turned on but unelectrified
Filter Installation of S&A CW-5200 water chiller
El vendedor asume toda la responsabilidad de este listado
Cantidad: Pais:
Envío y manipulación | Para | Servico | Entrega* |
US $75.00 | Estadpos Unidos | Entrega express: TNT/DHL/FEDEX/UPS | Estimado entre |
Tiempo de Manejo |
Enviará generalmente dentro de 3 días hábiles después de recibir el pago aprobado. |
Tenemos 4 almacenes en el extranjero en todo el mundo que ahora incluye: Rusia, EE.UU., Brasil y México. y Estamos creando otro en Europa. Normalmente, enviaremos su pedido desde el almacén más cercano a usted. si las existencias cerca de usted están agotadas, le enviaremos su pedido a usted directamente de China. |
|
Forma de pago |
|
Historial De Transacciones
Transacciones: 2
S&A 5200TI industrial water chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
We are authorized as "S&A" brand name product agent.
All of S&A water chillers are certified with design patent. Counterfeiting is not allowed,
Please recognize S&A logo when you purchase S&A water chillers.
CW-5200TH industrial water chillers have been popular for over 16 years with the annual output of 30,000 units.It is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60%.)
Cooling capacity is 1400W.
Have design patent Certificate, CE and RoHS Certificate.
This Water Chiller has been sold largely to Europe, South America, Asia and other markets.
Economic cooling equipment, easy to install and operate, compact and easily movable.
Model | CW-5200TITY |
Voltage | AC 1P 220V |
Frequency | 50/60Hz |
Current | 0.4~5.7A |
Machine Power | 0.66/0.78kW |
Compressor Power | 0.49/0.61kW |
0.65/0.81HP | |
Refrigeration Capacity | 4879Btu/h |
1.43kW | |
1229Kcal/h | |
Refrigerant | R-134a |
Refrigeration charge | 420g |
Pump Power | 0.09kW |
Pump pressure | 2.5bar |
Max. Flow | 15L/min |
Inlet and outlet | 10mm Fast connector |
Precision | ±0.3℃ |
Reducer | Capillary |
Protection | Overcurrent protection for compressor, flow alarm, over temperature alarm |
Tank capacity | 6L |
The new T503 intelligent temperature controller does not need to adjust the controlling parameters under normal circumstance. It will self-adjust controlling parameters according to room temperature for meeting equipment cooling requirements.
User also can adjust the water temperature as needed.
Temperature controller panel description:
In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5000/5200series chillers possesses an unique low flow alarm protection.
Chiller CW-5200 for 150W metal laser cutting machine
Water chiller CW-5200 for acrylic co2 laser cutting machine
industrial chiller CW-5200 for laser cutter
Air cooled chiller CW-5200 for co2 laser cutting & engraving machine
Water cooled chiller CW-5200 for uv Laser Marking Machine
CW-5200 chiller for 8w-15w uv laser machine
Refrigeration water chiller CW-5200 for laser marking machine
Compressor water chiller CW-5200 for UV curing system printer
Industrial water chiller CW-5200 for laser marker
Open the package to check if the machine is intact and all the necessary Accessories are completed. |
Open the injection port to feed cooling water. (Do not let the water spill over!)Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of cooling water additive (anti-corrosion water aqua). Working in cold north area, it’s better to use noncorrosive antifreeze fluid. |
According to system conditions, please connect the water inlet and outlet pipe well. |
Plug in power, turn on the power switch. (Do not start up without water in the water tank!)(1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. |
Check the water level in the water tank.The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. |
Adjust parameters of temperature controller.CW-5000/5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to page 15, “Operating status and parameters adjustment.” |
Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! |
Please make sure there is stable and normal voltage for the working chiller!As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. |
Unmatched power frequency can cause the chiller damage!Please choose model of 50Hz or 60Hz according to actual circumstance. |
To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank!The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! |
Please be sure that the air inlet and air outlet are in good ventilation!There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. |
The filter screen must be regularly cleaned!It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. |
Please pay attention to the effect of the condensate water!With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. |
Professional use only!The appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction,children being supervised not to play with the appliance! |
Failure | Failure Cause | Approach |
---|---|---|
Machine turned on but unelectrified | ||
Power cord is not plugged in place | Check and ensure the power interface and the power plug is plugged in place and in good contact. | |
Fuse burnt-out | Pull out the fuse box from the power supply interface of the chiller, check the fuse, replace with spare fuse if necessary and check whether the power supply voltage is stable; Check and ensure the power interface and the power plug is plugged in place and in good contact. | |
Flow Alarm (panel red light is on)use a water pipe directly connect to the water outlet and inlet but still without water flowing | Water level in the storage water tank is too low | Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. |
Flow Alarm occurs while running with other equipment (panel red light is on),but there is water flowing and no alarm when use a water pipe directly connected to the chiller water outlet and inlet. | Water circulation pipes are blocked or a pipe bending deformation. | Check water circulation pipe |
Ultra-high temperature alarm | ||
Blocked dust gauze, bad thermolysis | Unpick and wash the dust gauze regularly | |
Poor ventilation for air outlet and inlet | To ensure a smooth ventilation for air outlet and inlet | |
Voltage is extremely low or astable | To improve the power supply circuit or use a voltage regulator | |
Improper parameter settings on thermostat | To reset controlling parameters or restore factory settings | |
Switch the power frequently | To ensure there is sufficient time for refrigeration (more than 5 minuets) | |
Excessive heat load | Reduce the heat load or use other model with larger cooling capacity | |
Alarm for ultra-high room temperature | The working ambient temperature is too high for the chiller | To improve the ventilation to guarantee that the machine is running under 40℃. |
Serious problem of condensate water | Water temperature is much lower than ambient temperature, with high humidity | Increase water temperature or to preserve heat for pipeline |
Water drains slowly from outfall during water changing | Injection port is not open | Open the injection port |
Temperature Control Range | 5~35℃ |
Temperature Precision | ±0.3℃ |
Flow Rate | 16L/min |
Pressure | 25M |
Cooling Capacity | 1.49KW |
S&A AC220V 50Hz 0.71HP CW-5200TI Industrial Water Chiller (Cooling for One 50W Laser Diode, 15W-30W Solid-state Laser or 30W RF Laser Tube)
Model | CW-5200TITY |
Voltage | AC 1P 220V |
Frequency | 50/60Hz |
Current | 0.4~5.7A |
Machine Power | 0.66/0.78kW |
Compressor Power | 0.49/0.61kW |
0.65/0.81HP | |
Refrigeration Capacity | 4879Btu/h |
1.43kW | |
1229Kcal/h | |
Refrigerant | R-134a |
Refrigeration charge | 420g |
Pump Power | 0.09kW |
Pump pressure | 2.5bar |
Max. Flow | 15L/min |
Inlet and outlet | 10mm Fast connector |
Precision | ±0.3℃ |
Reducer | Capillary |
Protection | Overcurrent protection for compressor, flow alarm, over temperature alarm |
Tank capacity | 6L |
Order
|
Code
|
Project Setting
|
Range
|
Factory
Setting
|
Notes
|
1
|
F0
|
Temperature setting
|
F9 – F8
|
25
|
Constant temperature control effecting
|
2
|
F1
|
Temperature difference values
|
-15 - +5
|
-2
|
Intelligent control effecting
|
3
|
F2
|
Cooling hysteresis
|
0.1 – 3.0
|
0.8
|
|
4
|
F3
|
Way of control
|
0 - 1
|
1
|
1: intelligent
0: constant temperature
|
5
|
F4
|
Alarm for over high water temperature
|
1 - 20
|
10
|
|
6
|
F5
|
Alarm for over low water temperature
|
1 - 20
|
15
|
|
7
|
F6
|
Alarm for over high room temperature
|
40 - 50
|
45
|
|
8
|
F7
|
Password
|
00 - 99
|
8
|
|
9
|
F8
|
The allowed highest water temperature
|
F0 - 40
|
30
|
|
10
|
F9
|
The allowed lowest water temperature
|
1 – F0
|
20
|
|
Escriba un comentario para S&A 5200TI Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
a) The Stepped Price
According to the different procurement quantities of customers, Sign-in-China.com formulates different price levels for commodity. Hence, your purchase price will be ultimately attributed to the procurement quantity.
The Stepped Prices shown on the product page is as following:
b) Trial Order Price / Sample Price
We offer free samples or some lower priced products(the product price plus shipping cost only)for our customers easily to experience our products and services from purchasing.
For details, please click:
http://www.sign-in-global.com/product/sampleproduct.html
c) Limited Time Offers
Every Tuesday Sign-in-China.com releases the latest products for Limited Time Offer, and after one week, the original price will be recovered. We sincerely expect your timely attention to the discount activities of Limited Time Offers on Sign-in-China.com.
For details, please click:
http://www.sign-in-global.com/product/discount.html
d) Flash Wholesale
Every Monday Sign-In-China.com and cooperation factory jointly campaigns the Flash Wholesale products for bulk purchase customers, and after a week, the original price will be receovered. We sincerely expect your timely attention to the preferential activities on Sign-In-China.com.
For details, please click:
http://www.sign-in-global.com/product/featuredproduct.html
e) You decide the prices for Bulk Orders
If the commodity quality you choose beyonds the quantity of fourth step price on Sign-in-China.com, or if you think the website stepped prices don’t meet your bulk purchase demand, you can use our "Make Offer" service on Sign-in-China.com to fill out your planned purchase quantity and target price then submit as a Bulk Order, for which we will review and endeavor to realize the deal with you.
If you need bulk order , please enter here to Make Offer:
a) PayPal online payment
https://www.paypal.com/webapps/mpp/buying-online
b) PayPal direct payment (our PayPal account: lyh@chinasigns.cn)
https://www.paypal.com/webapps/mpp/make-online-payments
c) Credit card payment (through PayPal gateway, some areas may be restricted)
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
d) Bank transfer
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
e) Telegraphic Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-China.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
For details, please refer to the following:
a) Bank Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-China.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
b) PayPal online payment https://www.paypal.com/webapps/mpp/buying-online
c) PayPal direct payment (our PayPal account: lyh@chinasigns.cn) https://www.paypal.com/webapps/mpp/make-online-payments
d) Credit card payment (through PayPal gateway, some areas may be restricted) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
e) Bank transfer (through PayPal gateway) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
f) Western Union Payment
Receiver’s First name: Zifei Receiver’s Last name: Li Address: 4th Floor., Building No.8, Community No.12. Advanced Business Park, No.188 Western Road of the 4th Ring, Fengtai, Beijing.
a) Confirm if your credit card requires verification: https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=10568&m=SRE
b) Confirm if you have exceeded the limitation of maximum amount https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=11516&m=SRE
c) Confirm if you have any other restrictions https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94053&m=SRE
If you failed to make payment via PayPal, please choose Bank Transfer(T/T) or Western Union Payment.We will ship your order by Express or by sea and usually the carriers are FedEx, TNT, UPS, DHL, or EMS. It shall be quite safe during shipping with substantial package. It shall be quite safe during shipping with substantial package. Additionally, we will purchase insurance as a gift for your package.
For details, please click the following links:
Changes & Returns: http://www.sign-in-global.com/info/ChangesandReturns.html
Warranty: http://www.sign-in-global.com/info/QualityWarranty.html
S&A CW-6300BN Industrial Water Chiller for CNC CO2 Laser Cutting Machine 4.28HP, AC 1P 220V 60HZ
$2,793 - 3,103/set
Recibe gratis actualizaciones, descuentos y ofertas especiales para ganar productos gratis y premios en efectivo
www.sign-in-guatemala.com. es el mayor proveedor en línea de productos de publicidad en el mundo y especializados en el suministro de una solución integral para los clientes al seleccionar equipos de Publicidad, materiales de consumo articulos publicitarios, productos de publicidad, etc. También el centro de servicio en el extranjero autorizado por la Asociación China de impresión, de inyección de tinta, para lo cual hemos establecido sucursales en el extranjero, en 6 países extranjeros con el fin de brindar un mejor servicio a nuestros clientes en todo el mundo. Nuestros productos cubren todo el campo de la Publicidad y la señalización y todos los productos que suministramos se hacen de conformidad con las normas internacionales de calidad, como resultado de que, en la actualidad, tenemos más de 9000 productos en línea para la venta. Desde que implementamos la compra centralizada, todos los productos se cotizan a precios competitivos.