Supply plotter de gran formato\' at wholesalepirce - $1,036.00

S&A CW-6000DH Enfriador de Agua Industrial para Tubo Laser CO2 de 3 x 100W o 4 x 80W Tubos Laser CO2, 1.52HP, AC 1P 110V, 60HZ

Codigo de articulo:CW-6000DHTY

S&A CW-6000DH Industrial Water Chiller for 3 x 100W or 4 x 80W CO2 Glass Laser Tubes Cooling, 1.52HP, AC 1P 110V, 60HZ CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please recognize S&A logo when you purchase S&A water chillers. Description S&A CW-6000 series is high-precision compression refrigeration water chiller, with intelligent temperature control,completed configuration,perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature to avoid producing condensate water and protect the laser tube.You can adjust the water temperature under constant temperature. Suggestion: Intelligent temperature control mode for summer Constant temperature control mode for winter Note: Cooling water additive is forbidden by express company, so we could not put it into the package. You can buy it from local. Features： 3000W cooling capacity; optional environmental refrigerant; ±0.5°C precisely temperature control; The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Multiple power specifications; CE ,RoHS and REACH approval; Long working life and simple operation; Optional heater and water filter. SPECIFICATION Model CW-6000DH Voltage AC 1P 110V Frequency 60Hz Current 1-10A Compressor power 1.12KW 1.52HP Nominal cooling capacity 10724Btu/h 3.145KW 2711Kcal/h Refrigerant charge 650g Pump power 0.05KW Maximum Pumping Lift 12M Maximum Flow 13L/min N.W 60Kgs G.W 70Kgs Refrigerant R-22/R-410a Precision ±0.5℃ Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm Tank capacity 15 L Inlet and outlet Rp1/2'' Dimension 67X47X89 cm (L X W X H) Package dimension 74X60X109 cm (L X W X H) CONTOUR AND PARTS INTRODUCTION Independent production of sheet metal. High precision temperature control system. Adopt IPG fiber laser for welding and cutting sheet metal. Temperature control accuracy can reach ±0.5℃. Equipped with water pressure gauges and universal wheels. Water pressure gauges help monitor the discharge pressure of water pump while univeral wheels facilitate the moving of the chiller. Inlet and outlet connector equipped. Multiple alarm protection. The laser will stop working once it receives alarm signal from the water chiller for protection purpose. Cooling fan of famous brand installed. Level gauge equipped. Adopt SAN JU cooling fan with high quality and low failure rate. Customized dust gauze available and easy to take apart. Temperature controller panel description： The intelligent temperature controller does not need to adjust the controlling parameters under normal circumstance. It will self-adjust controlling parameters according to room temperature for meeting equipment cooling requirements. User also can adjust the water temperature as needed. Temperature controller panel description： Indicators of temperature controller working status: COMP ON, compressor working SV ON, solenoid valve working Heating ON, heating rod working INT Ctrl ON, controller working in intelligent control mode CT Ctrl ON, controller working in constant temperature control mode PARAM Set ON, controller working in parameters setting mode ALM OUT ON, alarm output status Room Temp ON, displaying room temperature ST DLA ON, starting up delay status Press ▼ button to show the room temperature, 6 seconds later default display restored. (Meanwhile, Room Temp light is on, displaying room temperature.) ▲▼ buttons are for modifying parameters values andbuttons are for switching parameter items. RST button: confirm. SET button: setting function. Alarm function (1) Alarm Display: When alarm occurs, the error code and the temperature will be alternately displayed. (2) To suspend the alarm: In alarming state, the alarm sound could be suspended by pressing any button, but the alarm display remains until the alarm condition is eliminated. Alarm and output ports In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-6000series chillers possesses an unique low flow alarm protection. (1) Flow alarm output ports and the wiring diagram (2) Flow alarm causes of circulating cooling water and working state Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. Application Certificate Warehouse Test System Packing Installation Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of cooling water additive (anti-corrosion water aqua). Working in cold north area, it’s better to use noncorrosive antifreeze fluid. According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set value, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start over the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. Adjust parameters of temperature controller. CW-6000 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to page 17, “Operating status and parameters adjustment.” Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Professional use only! The appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction,children being supervised not to play with the appliance! Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place Check and ensure the power interface and the power plug is plugged in place and in good contact. Fuse burnt-out Replace the protective tube in the power socket on the back of chiller. Flow Alarm (controller displays E6)use a water pipe directly connect to the water outlet and inlet but still without water flowing Water level in the storage water tank is too low Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. Flow Alarm occurs while running with other equipment (controller displays E6),but there is water flowing and no alarm whten use a water pipe directly connected to the chiller water outlet and inlet. Water circulation pipes are blocked or a pipe bending deformation. Check water circulation pipe Ultra-high temperature alarm (controller displays E2) Blocked dust gauze, bad thermolysis Unpick and wash the dust gauze regularly Poor ventilation for air outlet and inlet To ensure a smooth ventilation for air outlet and inlet Voltage is extremely low or astable To improve the power supply circuit or use a voltage regulator Improper parameter settings on thermostat To reset controlling parameters or restore factory settings Switch the power frequently To ensure there is sufficient time for refrigeration (more than 5 minuets) Excessive heat load Reduce the heat load or use other model with larger cooling capacity Ultrahigh room temperature alarm (controller displays E1) The working ambient temperature is too high for the chiller To improve the ventilation to guarantee that the machine is running under 40℃. Serious problem of condensate water Water temperature is much lower than ambient temperature, with high humidity Increase water temperature or to preserve heat for pipeline Water drains slowly from outfall during water changing Water supply inlet is not open Open the water supply inlet

»Bomba de Agua y Enfriador de Agua
Q932.00 - 1,036.00/set

Orden minima : 1 set

Generic Chip Resetter para Epson Stylus Pro 3800/3800C/3850/3880/3890/3885 con tanque de mantenimiento rellenable

Codigo de articulo:ACC-EPS-387

Generic Chip Resetter para Epson Stylus Pro 3800/3800C/3850/3880/3890/3885 con tanque de mantenimiento rellenable Para usarse con: Epson Stylus Pro 3800/3800C/3850/3880/3890/3885 Tamaño de embalaje: 3.1" x 3.1" x 1.97" (80 x 80 x 50mm) Peso bruto: 0.041kg Fabricante: Ving

»Refacciones para Plotter
Q18.37 - 20.87/pc

Orden minima : 1 pc

Panel I/O de cabezal Infiniti/Challenger FY-3208H,FY-3208G,FY-3208R,FY-3206G,FY-3206H

Codigo de articulo:ACC-LFP-125

con: Infiniti/Challenger FY-3208HA, FY-3208HF, FY-3208H, FY-3208G, FY-3208R, FY-3278N, FY-3278F, FY-3208F,FY-3206HA, FY-3206HF, FY-3206H, FY-3206R, FY-3206G, FY-3276HA, FY-3276R Tips de Advertencias: Como fabricantes de plotter Chinos actualicen el pizarron de de sistemas de control confrecuencia, te

»Refacciones para Plotter
Q122.88 - 133.56/pc

Orden minima : 1 pc

Generic Damper pequeño de cabezal Roland SJ-540/SJ-740/FJ-540/FJ-740 - 6081181200,2pc/parcel

Codigo de articulo:ACC-ROL-044-R

Damper pequeño de cabezal Roland SJ-540/SJ-740/FJ-540/FJ-740 Modelo aplicable : Roland FJ-540 / FJ-740 / FJ-600 / SJ-540 / SJ-740 / SP-300 / SP-540 / SC-540 / SC-545 / VP-300 / VP-540EX / SP-300I / SP-540I / SP-300V / SP-540V Fabricante: Ving refacciones Tipo de tinta Para ambos Eco

»Refacciones para Plotter
Q0.80 - 1.09/pc

Orden minima : 1 parcel

CNC Router Con Navaja Oscilatoria Doble Cabezal Para Corte De Trovicel, Madera, Cartón y Más

Codigo de articulo:SIT-CCD-1325B-C

trabajo AC220V/50Hz or AC380V/50Hz Herramientas de grabado Ø3.175/4/6/12.7mm Formato de archivo DXF/PLT/JPG/TIF/NC,etc Prescision de Posicionamiento ±0.05mm Prescision repetible ±0.02mm Dimensiones L3270 x W2260 x H1800 Los parámetros anteriores

»Router y Grabadora CNC
Q3.69 - 4.34/set

Orden minima : 1 set

Limpiador de goma para agua Roland FJ-540,FJ-740,FP-740,FH-740 - Original - 103320900/11379105

Codigo de articulo:ACC-ROL-206-R

Limpiador de goma para agua Roland FJ-540,FJ-740,FP-740,FH-740 - Original - 103320900/11379105 Para uso con : Roland FJ-540, FJ-740, FP-740, FH-740, CJ-400, CJ-500, CJ-540, FJ-40, FJ-400, FJ-42, FJ-50, FJ-500, FJ-52, FJ-600, FLJ-300 , SC-500, SC-540, SC-545EX, SJ-1000, SJ-1045EX, SJ-500

»Refacciones para Plotter
Q12.63 - 14.19/pc

Orden minima : 1 pc

Cable para la cbeza con set de 4 piezas Mutoh VJ-1624 t- 3pcs,29pin; 1pc,28pin

Codigo de articulo:ACC-WT-083

Mutoh VJ-1624 / VJ-1638 Head Cable 4pcs/set- 3pcs, 29pin; 1pc, 28pin Printer Compatibility: Mutoh VJ-1618 / VJ-1624 / VJ-1638 / VJ-1614 / VJ-1624W Net Weight: 30g/pc Manufacturer: Ving Parts

»Refacciones para Plotter
Q9.75 - 13.36/set

Orden minima : 1 set

Filtro de Tinta Original JYY 5μ para Impresoras Flora / Teckwin Solvent & UV (L-Q-ZII-Sab)

Codigo de articulo:ACC-OT-060

Filtro de Tinta Original JYY 5μ para Impresoras Flora / Teckwin Solvent & UV (L-Q-ZII-Sab). Calidad Original, Gran desempeño. Para uso con: FLORA Plotters de tinta solvente y UV Tamaño de empaque: 1.97" x 1.97" x 1.5" (50 x 50 x 45mm) Peso neto: 10g/pc Peso

»Refacciones para Plotter
Q9.02 - 10.02/pc

Orden minima : 1 pc

Cable para Sensor de tapón arriba/abajo Roland CJ-540/FJ-540/SC-540/SC-545EX/SJ-1000- 23505856

Codigo de articulo:ACC-ROL-213

Cable elevador para tapón de sensor Roland CJ-540/FJ-540/SC-540/SC-545EX/SJ-1000 Para usarse con: Roland CJ-540/ FJ-540/ SC-540/ SC-545EX/ SJ-1000/ SJ-1045EX/ SJ-540/ SJ-640/ SJ-645EX/ SJ-740/SJ-745EX Fabricante: Ving refacciones

»Refacciones para Plotter
Q4.01 - 5.01/pc

Orden minima : 1 pc

Cable de sensor para limpiador Roland CJ-540/FJ-540/SC-540/SC-545EX/SJ-1000/- 23505996

Codigo de articulo:ACC-ROL-211

Cable para limpiador de sensor Roland CJ-540/FJ-540/SC-540/SC-545EX/SJ-1000/ Para usarse con: Roland CJ-540/FJ-540/SC-540/SC-545EX/SJ-1000/SJ-1045EX/SJ-540/SJ-640/SJ-645EX/SJ-740/SJ-745EX Fabricante: Ving refacciones

»Refacciones para Plotter
Q7.34 - 9.18/pc

Orden minima : 1 pc

USA CVD ZnSe Lente de Enfoque Dia. 12mm FL 50.8mm para Grabadora y Cortadora Laser CO2

Codigo de articulo:CS-FL-ZM12

;seres de CO2 en 10.6um longitud de onda. Esto sería una gran lente para un grabador de co2 o laser de corte, para enfocar el haz en un punto apretado. Normal 0 21 false false false ES-MX X-NONE X-NONE

»Optic Lens Mirror or Mounts
Q19.59 - 24.49/pc

Orden minima : 1 pc

Block Terminal Conectora para Fuente de Poder Laser CO2 (6 Poles / 6 Pin + 3 Poles / 3 Pin)

Codigo de articulo:CS-TL-10

Incluye: 1 pc 6 pin block terminal conectora y 1 pc 3 pin block terminal conectora Detalles:

»Piezas de instalación para grabadores laser de CO2
Mex.$2.94 - 3.34/set

Orden minima : 1 set

Control remoto IR para tira LED SMD 5050 3528 de 44 llaves DC 12V 24A 288W RGB.

Codigo de articulo:LEDK-YXGH-44KEY-24A

Descripcion: Cuando se inserta la lampara al socket, asegurarse que el modulo de salida del control y el extremo (total del Yin or Yang V + V -) y el controlador del final, esten conectados de a cuerdo a las diferentes barras de luz para cambiar el cableado de salida. Cuando se inserte

»Reguladores y controladores LED
Mex.$8.49 - 10.61/pc

Orden minima : 1 pack

20CM Length Core Solder WireCable Soldadura para Instalacion de Tubo Laser CO2 20CM for Welding CO2 Laser Tube Installation

Codigo de articulo:CS-TL-11

Caracteristicas: • Buen soldado, aislante, no corrosivo • Bajo punto de fusion, usado en soldar hierro • Economico y conveniente • Estabilidad anti oxidacion y anti corrosion, desolda facilmente

»Piezas de instalación para grabadores laser de CO2
Mex.$0.88 - 1.00/pc

Orden minima : 1 pc

"plotter de gran formato\'"